Adhesive Dispensing

Home   |  Privacy   |   Terms   |  Accounts  |   Contact Us  |   About Us
 Product Search

You currently have items in your basket. (Total=)

> Home > Safe Components
Industrial Safe Products ...
Syringe barrels, cartridges, tips and nozzles are designed for use with air-powered dispensers under pressures to 100 psi. They are manufactured in a silicone-free facility to ensure fluids dispensed from them will not become contaminated. Manual syringe components such as hand assemblies are not for use with air-powered dispensing systems.

Industrial Grade Safe

Where specified, disposable components are certified industrial grade safe. This means that they are suitable for use with pneumatic dispensers. Most are safe for use to 100psi pressure with single use. This is not applicable to manual graduated syringes, etc. which are not designed for use with air powered dispensing equipment.

Disposable components, including syringe barrels, cartridges, pistons, tip caps, end caps, and dispense tips, are precision engineered for one-time use. Attempting to clean and re-use components will compromise dispensing accuracy and may increase the risk of personal injury.

Always wear appropriate protective equipment and clothing suitable for your dispensing application.

- Do not exceed maximum operating pressure of 100 psi (7.0kg/cm2).
- Do not heat syringe barrels or cartridges to a temperature greater than 100 F (38 C).
- Dispose of components according to local regulations after one-time use.
- Do not clean components with strong solvents (e.g. MEK, Acetone, THF, etc).
- Cartridge retainer systems and barrel loaders should be cleaned with mild detergents only.
- To prevent fluid waste in the barrel, use wiper pistons.
- With our air-powered syringe dispensers, use part 881-000-000 inline filter with watery liquids.

Silicone Free

Plastic syringes and other items are manufactured without the use of silicone mould release agents.  As a result of these zero silicone traces, adhesives and materials you dispense are not affected.  Some adhesives lose performance if exposed to silicones or release agents.  And silicones can find their way onto your end products. 

We only supply the highest quality components that are guaranteed silicone free, where specified. Some manual graduated syringes are not guaranteed silicone-free. All tips, air barrels, pistons, cartridges, plungers, nozzles and bottles are silicone-free materials.

ADL One-Year (12 months) Warranty

Plastic barrels, pistons and needle tips are high strength safe to 100 psi and warranted against defect for single use.  We recommend all plastic components are not cleaned with solvents and re-used when placed under high pressures as the plastics can become weaker over a length of time. Dispensing systems are covered by 1 year warranty against fault.

UK Customer Sales Freephone: 0800 0949058
Phone Sales: 0845 6520058  +44 (0) 845 6520058
Fax Sales: 0845 6520059  +44 (0) 845 6520059
Main Office: 01908 686660  +44 (0) 1908 686660
Accounts: 01908 686663  +44 (0) 1908 686663
Technical: 01908 322500  +44 (0) 1908 322500
Customer Service: 01908 686660  +44 (0) 1908 686660


Adhesive Dispensing Limited
Unit 55 Alston Drive
Bradwell Abbey
Milton Keynes
MK13 9HB
United Kingdom
VAT No. GB 901 8594 21
Registered in England & Wales No: 6048283

  Adhesive dispensers     Syringe barrels   Dispensing tips  
  Dispensers & Valve Controllers     Consumables
        Techcon Techkit cartridges  
  Cartridges & Plungers     Dispensing Nozzles   Techkit Cartridges  
  Full Catalogue
  Syringe Barrels
  Cartridges & Nozzles
  Dispense Tips
  Nozzles Brochure
  Dispense Guns
  Dual Air Guns
  Dual Cartridge & Mixers

  Syringe Barrels Syringe Pistons
Syringe Guns Cartridge Guns
Syringe Dispensers Dispensing Equipment
Mini Robots Small Robots
Medium Robots Large Robots
Extra Large Robots Fume Extraction
Bench Stands Syringe Racks
Compressors Cartridge Retainers
Cyanoacrylates Anaerobics
  Dispense Tips Tip Caps 
RTV Valves Cyanoacrylate Valves
Anaerobic Valves UV Cure Valves
Grease Valves Solder Paste Valves
Spray Valves Valve Controllers
Pressure Pots Syringe Filling Systems
Cartridges Nozzles
Cartridge Plungers Techkits
Dual Cartridges Mixer Nozzles

Copyright 2018 Adhesive Dispensing Ltd. All transactions subject to Adhesive Dispensing Ltd standard Terms & Conditions, E&OE.

Prices are in UK pounds.  Vat is not charged on orders placed outside the EU and any EU orders are exempt from VAT only if a valid company VAT number is provided to us at time of order or before shipping.  Products are covered by a 12-month warranty against faults and malfunction.  All orders online are encrypted for safety and security.  Please read our privacy agreement for details.  We also process phone or fax payments by credit and debit card.  Please contact our accounts department if you would like to open a credit account with us. Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.


Website copyright intelligence monitoring